Chevrolet Cobalt Service & Repair Manual: Wheel R&R
| 1. |
Raise and support the vehicle. |
| 2. |
Remove the wheel center cap, if equipped. |
| 3. |
Remove the wheel center cap nuts, if
equipped. |
| 4. |
Remove the wheel nuts. |
| 5. |
Remove the tire and wheel assembly. |
| 6. |
Reverse procedure to install, noting
the following: |
| |
a. |
Hand start the wheel nuts, Fig.
1. |
| |
b. |
Torque wheel nuts in the proper
sequence to 100 ft. lbs. |
|
Fig. 1 Wheel nut torque sequence
1.
Raise and support the vehicle.
2.
Remove the tire and wheel assembly.
3.
Remove the brake rotor assembly.
...
See also:
Chevrolet Cobalt Service & Repair Manual. Description
This ignition system uses one
coil for each pair of cylinders. Each pair of cylinders that are at Top
Dead Center (TDC) at the same time are known as companion cylinders. The
cylinder that is at TDC of its compression stroke is called the event cylinder.
The cylinder that is a ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Wheel Hub R&R
