Chevrolet Cobalt Owners Manual: Headlamp High/Low-Beam Changer
Chevrolet Cobalt Owners Manual / Instrument Panel / Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high beam, push the turn signal lever away from you.
This indicator light
appears on the instrument
panel cluster when the
high beams are on.
To change the headlamps from high beam to low beam, pull the turn signal lever toward you.
Turn and Lane-Change Signals
An arrow on the
instrument panel cluster
flashes in the direction of
the turn or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow st ...
Flash-to-Pass
To signal to a driver in front of you that you want to
pass, pull the turn signal/multifunction lever until the
high-beam headlamps come on. Then release the lever
to turn them off. ...
See also:
Chevrolet Cobalt Service & Repair Manual. Compression Pressures
1.
Ensure engine is at room temperature
and battery is fully charged.
2.
Disconnect wiring from ignition module
and remove spark plugs.
3.
Throttle body valve should be wide
open.
...
Chevrolet Cobalt Owners Manual
- In Brief
- Seats and Restraint System
- Features and Controls
- Instrument Panel
- Driving Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
Chevrolet Cobalt Service Manual
- Air Bags
- Air Conditioning & Heater
- Body & Frame
- Brakes
- Cooling System
- Driveline
- Electrical
- Electronic Stability Controls
- Engine Service
Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0047