Chevrolet Cobalt Owners Manual: Finish Damage
Chevrolet Cobalt Owners Manual / Service and Appearance Care / Finish Damage
Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense.
Minor chips and scratches can be repaired with touch-up materials available from your dealer/retailer.
Larger areas of finish damage can be corrected in your dealer's/retailer's body and paint shop.
Sheet Metal Damage
If the vehicle is damaged and requires sheet metal
repair or replacement, make sure the body repair shop
applies anti-corrosion material to parts repaired or
replaced to restore corrosion protectio ...
Underbody Maintenance
Chemicals used for ice and snow removal and dust
control can collect on the underbody. If these are
not removed, corrosion and rust can develop on the
underbody parts such as fuel lines, frame, flo ...
See also:
Chevrolet Cobalt Service & Repair Manual. Oil Pressure Switch R&R
Refer to Fig. 1
when performing following procedure.
1.
Disconnect battery ground cable.
2.
Raise and support vehicle.
3.
Remove starter solenoid terminal nut.
4.
Remov ...
Chevrolet Cobalt Owners Manual
- In Brief
- Seats and Restraint System
- Features and Controls
- Instrument Panel
- Driving Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
Chevrolet Cobalt Service Manual
- Air Bags
- Air Conditioning & Heater
- Body & Frame
- Brakes
- Cooling System
- Driveline
- Electrical
- Electronic Stability Controls
- Engine Service
Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0093