Chevrolet Cobalt Owners Manual: Floor Console Fuse Block
Chevrolet Cobalt Owners Manual / Service and Appearance Care / Floor Console Fuse Block
The floor console fuse block is located on the passenger side of the floor console behind the forward panel. The panel has three clips. Pull the panel to disconnect the three clips, and access the fuses.
Use the fuse puller to remove fuses.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from
short circuits by a combination of fuses, circuit breakers
and fusible thermal links. This greatly reduces the
chance of damage caused by elect ...
Engine Compartment Fuse Block
The engine compartment fuse block is located on the
driver side of the vehicle. Lift off the cover to check
the fuses. See Engine Compartment Overview for more information on location.
Notice: Spil ...
See also:
Chevrolet Cobalt Service & Repair Manual. System Service
Component Replacement
Ignition Control Module (ICM)
1.
Remove accelerator cable from bracket.
2.
Remove accelerator cable bracket bolt
and bracket.
3.
Disconnect ignition control module
harness connec ...
Chevrolet Cobalt Owners Manual
- In Brief
- Seats and Restraint System
- Features and Controls
- Instrument Panel
- Driving Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
Chevrolet Cobalt Service Manual
- Air Bags
- Air Conditioning & Heater
- Body & Frame
- Brakes
- Cooling System
- Driveline
- Electrical
- Electronic Stability Controls
- Engine Service
Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0035