Chevrolet Cobalt Service & Repair Manual: Blower Motor Relay R & R
| Refer to Fig. 1
when performing the following procedure. |
| 1. |
Disconnect the blower motor resistor
electrical connector. |
| 2. |
Unsnap the blower motor resistor from
the HVAC module and remove. |
| 3. |
Reverse procedure to install. |
|
Fig. 1 Blower motor relay replacement
Refer to Fig. 1
for ambient air temperature sensor service.
Fig. 1 ...
Warning: To avoid being burned,
do not remove the radiator cap or surge tank cap while the engine is hot.
The cooling system will release scalding fluid and steam under pressure
if ...
See also:
Chevrolet Cobalt Service & Repair Manual. Computer Relearn Procedure
Body Control Module (BCM)
Connect a Tech 2 or suitably programmed
scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.
Dash Integration Module (DIM)
Connect a Tech 2 or suitably programmed
scan tool to Data Link Connector (DLC) and follow m ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Ambient Air Temperature Sensor R&R
Coolant Drain, Flush & Refill