Chevrolet Cobalt Service & Repair Manual: Front Bumper Upper Fascia Grille
Removal
| 1. |
Remove front bumper fascia, as outlined
in Front Bumper Fascia. |
| 2. |
Remove front bumper fascia grille push
pin retainers (1), Fig. 1. |
| 3. |
Remove front bumper fascia grille fasteners
(2). |
| 4. |
Use a flat-bladed tool to release grille
from fascia. |
| 5. |
Remove grille from fascia (3). |
|
Installation
| 1. |
Install grille to fascia ensuring locking
tabs are fully seated. |
| 2. |
Install front bumper fascia grille
push pin retainers (1), Fig. 1. |
| 3. |
Install front bumper fascia grille
fasteners (2). |
| 4. |
Install front bumper fascia as outlined
in Front Bumper Fascia. |
|
Fig. 1 Front bumper upper fascia grille
Removal
1.
Remove front bumper fascia as outlined
in Front Bumper Fascia.
2.
Remove bolts attaching front bumper
impact bar to veh ...
Removal
Apply tape along door and fascia
edge to protect paint.
1.
Raise and support vehicle.
2.
Remove tire and wheel assemb ...
See also:
Chevrolet Cobalt Service & Repair Manual. Relearn
Initialization Sequence
The EBCM performs one initialization
test each ignition cycle. The initialization of the EBCM occurs when the
EBCM detects the there is a minimum of 500 RPM from the ECM by means of
a serial data message and the stop lamp switch is not applied. The initial ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Front Bumper Impact Bar
Front Fender