Chevrolet Cobalt Service & Repair Manual: Rotor Replace

Chevrolet Cobalt Service & Repair Manual / Brakes / Disc Brakes / Rotor Replace

Cobalt & Malibu

1. Raise and support vehicle, then remove tire and wheel assembly.
2. Compress piston into caliper bore using suitable C-clamp to allow caliper pivot upward from brake pads.
3. Install and tighten two wheel nuts opposite to retain rotor to hub.
4. Remove guide pin bolts, caliper and bracket.
5. Mark rotor to wheel studs for installation alignment and remove rotor.
6. Reverse procedure to install.

Camaro

1. Raise and support vehicle.
2. Remove tire and wheel assembly.
3. Remove and discard disc brake caliper bracket bolts.Disc brake caliper bracket bolts must be replaced any time they are removed. Do not reuse disc brake caliper bracket bolts.
4. Remove disc brake caliper and bracket assembly and support with heavy mechanics wire or equivalent.
5. Remove disc brake rotor bolt.
6. Remove disc brake rotor.
7. Reverse procedure to install.
    Parking Brake Service
    Parking Brake Equalizer Cable, Replace 1. Remove center console. 2. Remove adjuster nut and cables from equalizer, Fig. 1. ...

    Tightening Specifications
    Year Component Torque Ft. Lbs. CAMARO 2010 Brake Rotor Bolt 89 1 Calip ...

    See also:

    Chevrolet Cobalt Owners Manual. Door Locks
    WARNING: Unlocked doors can be dangerous. - Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, a ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0066