Chevrolet Cobalt Service & Repair Manual: Component Replacement
Master Cylinder
| 1. |
On Vibe models, remove air filter
hose clamp and hose from throttle body. |
| 2. |
On all models, disconnect fluid
level sensor retainer and electrical connector. |
| 3. |
Drain master cylinder reservoir brake
fluid into suitable container. |
| 5. |
Disconnect master cylinder brake pipes.
Plug open pipes. |
| 6. |
Remove mounting nuts and master cylinder. |
| 7. |
Remove reservoir, as required. |
| 8. |
Reverse procedure to install. Bleed
hydraulic system as outlined in Brake System Bleed. |
|
Brake fluid is corrosive to painted
surfaces. Care must be taken not to allow brake fluid to come in contact
with painted surfaces on vehicle.
When bleeding the brake syste ...
Master Cylinder Overhaul
Impala
Disassemble
Refer to Figs. 1
and 2, when performing the following procedures.
1.
Disconnect and plug hydraulic lines.
...
See also:
Chevrolet Cobalt Owners Manual. Parking Brake
Automatic Shown, Manual Similar
The parking brake lever is located between the
front seats.
For vehicles equipped with an armrest, lift the console
armrest in order to access the parking brake lever.
To set the parking brake, hold the brake pedal down
and pull up on the parking brake lever. ...
Brake System Bleed
Component Service