| 1. |
Drain cooling system into a suitable
container. |
| 2. |
Remove air cleaner outlet resonator. |
| 3. |
Reposition radiator inlet hose clamp
at radiator, using hose clamp pliers tool No. J 38185 or equivalent. |
| 4. |
Remove radiator inlet hose from radiator. |
| 5. |
Reposition radiator outlet hose clamp
at radiator, using hose clamp pliers tool No. J 38185 or equivalent. |
| 6. |
Remove radiator outlet hose from radiator. |
| 7. |
On models with automatic transmission,
proceed as follows: |
| |
a. |
Clean upper transmission oil cooler
line connection point and remove line from radiator. |
| |
b. |
Remove lefthand front wheelhouse liner. |
| |
c. |
Remove lefthand engine splash shield. |
| |
d. |
Clean lower transmission oil cooler
line connection point and remove line from radiator. |
| 8. |
On all models, remove cooling
fan assembly from radiator by pushing up on fan shroud to unsnap
retaining features. Position cooling fan assembly away from radiator
and support cooling fan assembly. |
| 9. |
Remove air dam push-in retainer. |
| 11. |
On models with air conditioning,
proceed as follows: |
| |
a. |
Remove condenser bolts. |
| |
b. |
Slide condenser down to disengage upper
mounting tabs from radiator. Position condenser away from radiator
and support condenser. You are not required to discharge A/C system. |
| 12. |
On all models, remove righthand
and lefthand radiator side baffles. |
| 13. |
Remove righthand engine splash shield
to radiator mount push-in retainer. |
| 14. |
On models with manual transmission,
remove lefthand engine splash shield to radiator mount push-in retainer. |
| 15. |
On all models, remove lower
radiator mounts, brackets, and bolts. |
| 16. |
If equipped, tilt condenser forward
in vehicle. Tilt cooling fan assembly rearward in vehicle. Remove
radiator assembly from vehicle. |
| 17. |
Remove upper radiator air baffle. |
| 18. |
Reverse procedure to install, noting
the following: |
| |
a. |
Fill cooling system with suitable coolant. |
| |
b. |
Torque lower radiator mount
and bracket bolts to 18 ft. lbs. |
| |
c. |
Torque transmission oil cooler
lines to 15 ft. lbs. |
|
Radiator Fan Shroud R&R
Driveline