Chevrolet Cobalt Service & Repair Manual: High Mount Stoplamp Bulb, Replace
| 1. |
Remove rear compartment lid inner panel
trim. |
| 2. |
Disengage tabs on high mount stoplamp
bulb connector (1) and remove connector from high mount stoplamp,
Fig. 1. |
| 3. |
Remove high mount stoplamp bulb (2),
Fig. 1. |
| 4. |
Reverse procedure to install. |
|
Fig. 1 High mount stoplamp bulb removal. Coupe
Refer to "Multi-Function Switch,
Replace" for replacement procedure.
...
Refer to Fig. 1
when performing the following procedure.
1.
Disconnect blower motor resistor electrical
connector.
2.
Un ...
See also:
Chevrolet Cobalt Service & Repair Manual. Compression Pressure
When inspecting cylinder compression,
the engine should be at room temperature, the throttle should be open, the
spark plugs removed and the battery at full charge. The lowest reading cylinder
should not be less than 70% of the highest and no cylinder reading should
be less th ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Headlamp Switch, Replace
HVAC Blower Motor Switch R&R