Chevrolet Cobalt Service & Repair Manual: HVAC Blower Motor Switch R&R
| Refer to Fig. 1
when performing the following procedure. |
| 1. |
Disconnect blower motor resistor electrical
connector. |
| 2. |
Unsnap blower motor resistor from HVAC
module and remove. |
| 3. |
Reverse procedure to install. |
|
Fig. 1 Blower motor resistor replacement
1.
Remove rear compartment lid inner panel
trim.
2.
Disengage tabs on high mount stoplamp
bulb connector (1) and remove connector f ...
1.
Lower steering column to lowest position.
2.
Remove steering column upper and lower
trim covers.
3.
Remov ...
See also:
Chevrolet Cobalt Owners Manual. License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the
license plate lamps.
2. Turn and pull the license plate lamp toward you
through the opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Push t ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
High Mount Stoplamp Bulb, Replace
Ignition Lock, Replace