Chevrolet Cobalt Service & Repair Manual: Engine Oil Filter Adapter R&R
| Refer to Fig. 1
when performing the following procedure. |
| 1. |
Place a collecting pan underneath the
oil filter. |
| 2. |
Use tool No. EN-44887 to remove the
oil filter cap (1) and seal, Fig. 1. |
| 3. |
Remove and properly dispose of the
oil filter insert (2), Fig. 1. |
| 5. |
Place a collecting pan underneath the
oil drain plug. |
| 6. |
Remove the oil drain plug (1) and seal
(2), Fig. 1. |
| 7. |
Reverse procedure to install, noting
the following: |
| |
a. |
Torque oil drain plug to 18
ft. lbs. |
| |
b. |
Torque oil filter cap to 18
ft. lbs. |
|
Fig. 1 Oil filter adapter replacement
A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern.
Caution: The fuel system is ...
1.
Install the engine support fixture.
2.
Remove the engine mount.
3.
Raise the engine enough to allow clearance
...
See also:
Chevrolet Cobalt Owners Manual. DIC Warnings and Messages
These messages appear if there is a problem detected
in one of your vehicle's systems.
A message clears when the vehicle's condition is no
longer present. To acknowledge a message and clear it
from the display, press and hold any of the DIC buttons.
If the condition is still present, the warnin ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Engine No Start
Engine Oil Pan Gasket R&R