Chevrolet Cobalt Service & Repair Manual: Shock Absorber, Replace
Rear
| 1. |
Raise and support vehicle, then remove
tire and wheel assembly. |
| 2. |
Support rear axle with a suitable jack
stand. |
| 3. |
Remove upper and lower shock absorber
mounting bolts, then the shock absorber. |
| 4. |
Reverse procedure to install, noting
the following: |
| |
a. |
Torque wheel lug nuts to 100
ft. lbs. |
| |
b. |
Torque lower shock absorber
bolt to 81 ft. lbs. |
| |
c. |
Torque upper shock absorber
bolt to 66 ft. lbs. |
|
1.
Ensure front wheels are in straight
ahead position, then secure steering wheel to prevent rotation.
2.
Raise and support vehicle, then ...
Refer to Fig. 1
when performing the following procedure.
1.
Raise and support the vehicle.
2.
Remove the front tire and wheel ...
See also:
Chevrolet Cobalt Owners Manual. Turn and Lane-Change Signals
An arrow on the
instrument panel cluster
flashes in the direction of
the turn or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane change
is complete.
The lever ...
Rack & Pinion Assembly, Replace
Stabilizer Bar Link Kit R&R