Chevrolet Cobalt Service & Repair Manual: Multi-Function Switch, Replace
| 1. |
Remove steering column trim covers. |
| 2. |
Remove multi-function switch retaining
screws. |
| 3. |
Disconnect multi-function switch electrical
connector, then remove switch from column. |
| 4. |
Reverse procedure to install. |
|
The Malfunction Indicator Lamp
(MIL) is located on the Instrument Panel Cluster (IPC). The MIL informs
the driver that an emission system fault has occurred and that the engine
cont ...
1.
Apply parking brake and place control
assembly in Neutral. Transaxle manual shaft must be in Neutral position
prior to installing range switch.
...
See also:
Chevrolet Cobalt Service & Repair Manual. Engine Valves R&R
Valve stem oil seal alignment
and position is critical. An improperly installed valve stem oil seal may
lead to excessive oil consumption, and increased vehicle emissions.
When replacing multiple valves
simultaneously, mark valves in relation to cylinder/port. Keep al ...
Malfunction Indicator Lamp, Diagnosis & Testing
Neutral Safety Switch, Replace