Chevrolet Cobalt Service & Repair Manual: Crankshaft Rear Oil Seal R&R
Removal
| 2. |
Remove flywheel or flexplate. |
| 3. |
Remove crankshaft rear oil seal using
suitable flat bladed tool. |
| 4. |
Reverse procedure to install. |
|
Method A
1.
Measure the crankshaft bearing journal
diameter with a micrometer in several places, 90 degrees apart.
Average the measurements.
...
Removal
1.
Raise and support vehicle.
2.
Remove front tire and wheel assembly.
3.
Remove front fender liner.
...
See also:
Chevrolet Cobalt Service & Repair Manual. Relearn
Initialization Sequence
The EBCM performs one initialization
test each ignition cycle. The initialization of the EBCM occurs when the
EBCM detects the there is a minimum of 500 RPM from the ECM by means of
a serial data message and the stop lamp switch is not applied. The initial ...
Crankshaft Main Bearing Clearance Measure
Crankshaft Seal R&R