Chevrolet Cobalt Service & Repair Manual: Intake Manifold, Replace
Removal
| 1. |
Remove air inlet duct and resonator. |
| 2. |
Disconnect IAC, TPS and MAP sensor. |
| 3. |
Disconnect EVAP and PCV hose. |
| 4. |
Disconnect purge solenoid tube and
brake booster hose. |
| 5. |
Remove oil dipstick tube bolt. |
| 6. |
Disconnect accelerator and cruise control
cables. |
| 7. |
Remove throttle body and fuel rail. |
| 8. |
Remove KS connector from intake manifold. |
| 9. |
Remove mounting nuts, bolts and intake
manifold. |
| 10. |
Reverse procedure to install. |
|
1.
Remove the intake manifold cover.
2.
Remove the air cleaner outlet duct.
3.
Disconnect the engine harness elect ...
Removal
1.
Raise and support vehicle.
2.
Drain engine oil into suitable container.
3.
Remove engine mount strut b ...
See also:
Chevrolet Cobalt Service & Repair Manual. Cylinder Head Overhaul
It is usually recommended to send
head to machine shop for complete overhaul.
Cylinder head must be cool before
removing it from engine. Cylinder head warpage can result if a warm or hot
cylinder head is removed.
Place clean shop towels over exposed
e ...