Chevrolet Cobalt Service & Repair Manual: Intake Manifold Bolts Re-Torque

Chevrolet Cobalt Service & Repair Manual / Engine Service / Intake Manifold Bolts Re-Torque

Refer to Fig. 1 when performing the following procedure.
1. Install the intake manifold bolts and nuts finger tighten.
2. Torque the intake manifold bolts and nuts in sequence to 89 inch lbs.

Fig. 1 Intake manifold torque specification

    Fuel Pump, Replace
    Removal 1. Relieve fuel system pressure as outlined under "Precautions." 2. Drain fuel tank. 3. R ...

    Intake Manifold Gasket R&R
    1. Remove the intake manifold cover. 2. Remove the air cleaner outlet duct. 3. Disconnect the engine harness elect ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Wheel Hub & Bearing, Replace
    Rear Disc Brakes 1. Raise and support vehicle, then the tire and wheel assembly. 2. Without disconnecting the hydraulic brake flex hose, remove and support rear brake caliper and bracket as an assembly. ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037