Chevrolet Cobalt Service & Repair Manual: Stabilizer Bushing R&R
| Refer to Fig. 1
when performing the following procedure. |
| 1. |
Raise and support the vehicle. |
| 2. |
Remove front stabilizer shaft clamp
bolt. |
| 3. |
Remove front stabilizer shaft clamp
nut. |
| 4. |
Remove front stabilizer shaft clamp. |
| 5. |
Remove front stabilizer shaft insulator. |
| 6. |
Reverse procedure to install. Torque
front stabilizer shaft clamp nut and bolt to 37 ft. lbs. |
|
Fig. 1 Stabilizer shaft insulator replacement
Front
1.
Raise and support vehicle, then remove
tire and wheel assemblies.
2.
Remove rear transaxle mount.
3.
...
1.
Ensure front wheels are in straight
ahead position, then secure steering wheel to prevent rotation.
2.
Raise and support vehicle, then ...
See also:
Chevrolet Cobalt Service & Repair Manual. Battery Cable, Replace
Ground Cable
Battery To Battery Tray
Caution: Unless directed otherwise,
the ignition and start switch must be in the OFF or LOCK position, and all
electrical loads must be OFF before servicing any electrical component.
Disconnect the battery ground to prevent an electrical spar ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Stabilizer Bar, Replace
Steering Gear, Replace