Chevrolet Cobalt Service & Repair Manual: Heater Hose, Replace
Inlet
| 1. |
Drain coolant into a suitable container. |
| 2. |
Loosen hose clamp connecting hose to
heater core inlet tube. |
| 3. |
Loosen hose clamp connecting hose to
water pump bypass tube. |
| 4. |
Remove hose from vehicle. |
| 5. |
Reverse procedure to install. |
|
Outlet
| 1. |
Drain coolant into a suitable container. |
| 2. |
Loosen hose clamp connecting hose to
heater core outlet tube. |
| 3. |
Loosen hose clamp connecting hose to
intake manifold tube. |
| 4. |
Remove hose from vehicle. |
| 5. |
Reverse procedure to install. |
|
Lower
1.
Drain coolant into a suitable container.
2.
Loosen hose clamp connecting hose to
radiator.
3.
Loos ...
1.
Disconnect the cooling fan electrical
connector.
2.
Remove the cooling fan wire from the
fan shroud, Fig. 1.
...
See also:
Chevrolet Cobalt Service & Repair Manual. Engine No Start
A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern.
Caution: The fuel system is
under constant pressure, even with the key off. Before testing or servicing
fuel system rel ...
Coolant Hose, Replace
Radiator Fan Shroud R&R