Chevrolet Cobalt Service & Repair Manual: HVAC Blower Motor Switch R&R

Refer to Fig. 1 when performing the following procedure.
1. Disconnect blower motor resistor electrical connector.
2. Unsnap blower motor resistor from HVAC module and remove.
3. Reverse procedure to install.

Fig. 1 Blower motor resistor replacement

    High Mount Stoplamp Bulb, Replace
    1. Remove rear compartment lid inner panel trim. 2. Disengage tabs on high mount stoplamp bulb connector (1) and remove connector f ...

    Ignition Lock, Replace
    1. Lower steering column to lowest position. 2. Remove steering column upper and lower trim covers. 3. Remov ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Connecting Rod R&R
    1. Rotate the crankshaft to a position where the connecting rod bolts are the most accessible, Fig. 1. 2. Mark the connecting rod and cap with the cylinder position. Also mark their orientation. This will ensure the caps ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0055