Chevrolet Cobalt Service & Repair Manual: Wiper Motor, Replace
| 1. |
Remove wiper arm assemblies. |
| 2. |
Disconnect washer tubing from air inlet
screen. |
| 3. |
Remove air inlet grille panel push-in
retainers from panel using door trim pad and garnish clip remover
tool No. J-38778, or equivalent. |
| 4. |
Remove air inlet grille panel from
vehicle. |
| 5. |
Disconnect electrical connector from
wiper motor. |
| 6. |
Remove screws and wiper drive system
module from vehicle. |
| 7. |
Remove wiper transmission from wiper
motor crank arm using wiper transmission separator tool No. J-39232,
or equivalent. |
| 8. |
Remove screws, then the wiper motor
from frame. |
| 9. |
Reverse procedure to install. Torque
mounting screws to 88 inch lbs. |
|
1.
Move wiper arm to service up position,
Fig. 1.
2.
Press wiper blade retainer button in
to release wiper blade from inside radius ...
1.
Remove steering column trim covers.
2.
Remove multi-function switch as outlined
in "Multi-Function Switch, Replace."
...
See also:
Chevrolet Cobalt Owners Manual. Jump Starting
If the vehicle's battery has run down, you may want to
use another vehicle and some jumper cables to start
the vehicle. Be sure to use the following steps to do it
safely.
WARNING:
Batteries can hurt you. They can be dangerous
because:
- They contain acid that can burn you.
- They contain ga ...
Windshield Wiper Blade R&R
Wiper Switch, Replace