Chevrolet Cobalt Service & Repair Manual: Wiper Switch, Replace

Chevrolet Cobalt Service & Repair Manual / Electrical / Component Replacement / Wiper Switch, Replace

1. Remove steering column trim covers.
2. Remove multi-function switch as outlined in "Multi-Function Switch, Replace."
3. Remove retaining screws, then the wiper switch from column.
4. Disconnect electrical connector.
5. Reverse procedure to install. Torque attaching screws to 36 inch lbs.
    Wiper Motor, Replace
    1. Remove wiper arm assemblies. 2. Disconnect washer tubing from air inlet screen. 3. Remove air inlet grill ...

    Wiper Transmission, Replace
    1. Remove wiper arm assemblies. 2. Disconnect washer tubing from air inlet screen. 3. Remove air inlet grill ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Oil Pressure Switch R&R
    Refer to Fig. 1 when performing following procedure. 1. Disconnect battery ground cable. 2. Raise and support vehicle. 3. Remove starter solenoid terminal nut. 4. Remov ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037