Chevrolet Cobalt Service & Repair Manual: Wiper Motor, Replace
| 1. |
Remove wiper arm assemblies. |
| 2. |
Disconnect washer tubing from air inlet
screen. |
| 3. |
Remove air inlet grille panel push-in
retainers from panel using door trim pad and garnish clip remover
tool No. J-38778, or equivalent. |
| 4. |
Remove air inlet grille panel from
vehicle. |
| 5. |
Disconnect electrical connector from
wiper motor. |
| 6. |
Remove screws and wiper drive system
module from vehicle. |
| 7. |
Remove wiper transmission from wiper
motor crank arm using wiper transmission separator tool No. J-39232,
or equivalent. |
| 8. |
Remove screws, then the wiper motor
from frame. |
| 9. |
Reverse procedure to install. Torque
mounting screws to 88 inch lbs. |
|
1.
Move wiper arm to service up position,
Fig. 1.
2.
Press wiper blade retainer button in
to release wiper blade from inside radius ...
1.
Remove steering column trim covers.
2.
Remove multi-function switch as outlined
in "Multi-Function Switch, Replace."
...
See also:
Chevrolet Cobalt Owners Manual. Rear Window Defogger
The rear window defogger uses a warming grid to
remove fog from the rear window.
The rear window defogger only works when the ignition
is in ON/RUN.
(Rear): Press to turn the
rear window defogger on
or off. Be sure to clear as much snow from the rear
window as possible. An indicator light c ...
Windshield Wiper Blade R&R
Wiper Switch, Replace