Chevrolet Cobalt Service & Repair Manual: Alternator, Replace
| 1. |
Disconnect battery ground cable from
battery. |
| 2. |
Remove accessory drive belt. |
| 3. |
Remove engine harness alternator connector. |
| 4. |
Remove engine harness terminal boot. |
| 5. |
Remove alternator terminal nut. |
| 6. |
Remove alternator retaining bolts and
nuts. |
| 7. |
Remove alternator from vehicle. |
| 8. |
Reverse procedure to install, noting
the following: |
| |
a. |
Torque alternator B+ terminal
nut to 15 ft. lbs. |
| |
b. |
Torque alternator mounting bolt
to 16 ft. lbs. |
|
Caution: Wear suitable eye
protection and heavy leather gloves when removing and installing pulley.
Do not remove or install pulley
with alternator in upright position.
...
1.
Disconnect battery ground cable from
battery.
2.
Raise and support vehicle.
3.
Remove starter solenoid te ...
See also:
Chevrolet Cobalt Owners Manual. Engine Oil
Checking Engine Oil
It is a good idea to check the engine oil level at each
fuel fill. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop.
See Engine Compartment Overview
for the location of the eng ...
Alternator Pulley, Replace
Starter, Replace