Chevrolet Cobalt Service & Repair Manual: Oil Pan, Replace

Chevrolet Cobalt Service & Repair Manual / Engine Service / Oil Pan, Replace

Removal

1. Raise and support vehicle.
2. Drain engine oil into suitable container.
3. Remove engine mount strut bracket.
4. Remove front fender liner.
5. Turn drive belt tensioner clockwise.
6. Remove serpentine drive belt.
7. Remove lower air conditioning compressor bolts.
8. Loosen upper air conditioning compressor bolts.
9. Remove oil pan bolts in sequence, Fig. 1.
10. Remove oil pan.
11. Reverse procedure to install. Torque oil pan mounting bolts to 18 ft. lbs., in reverse of loosening sequence, Fig. 1.

Fig. 1 Oil pan bolt loosening sequence

    Intake Manifold, Replace
    Removal 1. Remove air inlet duct and resonator. 2. Disconnect IAC, TPS and MAP sensor. 3. Disconnect EVAP and PCV ...

    Oil Pump, Replace
    Removal 1. Raise and support vehicle. 2. Drain engine oil into suitable container. 3. Remove engine mount strut b ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Timing Chain, Replace
    Caution: With the timing chain removed, avoid turning the camshaft or crankshaft. If movement is required, exercise extreme caution to avoid valve damage caused by piston contact. 1. Disconnect and isolate battery ground cable. ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0032