Chevrolet Cobalt Service & Repair Manual: Wheel Bearing, Replace

Chevrolet Cobalt Service & Repair Manual / Steering & Suspension / Wheel Bearing, Replace

Front

1. Raise and support vehicle using suitable lift.
2. Remove tire and wheel assemblies.
3. Remove drive axle nut, Fig. 1.
4. Remove brake caliper and rotor assembly.
5. Remove hub and bearing assembly, Figs. 2 and 3.
6. Reverse procedure to install.

Fig. 1 Drive axle nut removal

Fig. 2 Hub & bearing assembly removal

Fig. 3 Hub & bearing assembly removal. Cobalt & G5

    Vibration, Diagnosis
    The designs and engineering requirements of vehicles have undergone drastic changes over the last several years. Vehicles are stiffer and provide more isolation from road input than the ...

    Wheel Hub & Bearing, Replace
    Rear Disc Brakes 1. Raise and support vehicle, then the tire and wheel assembly. 2. Without disconnecting the hydraulic brake fle ...

    See also:

    Chevrolet Cobalt Owners Manual. If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow
    Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. See Rocking Your Vehicle to Get It Out. If the vehicle has a traction system, it can often help to free a stuck vehicle. Refer to the vehicle's traction system in the Index. If stuck too severely fo ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037