Security Lock Label shown
The rear door security
locks are located on the
inside edge of each rear
door. You must open the
rear doors to access
them. The label showing
lock and unlock positions
is located near the lock.
To set the locks, do the following: 1. Insert the key into the security lock slot and turn it so the slot is in the horizontal position.
2. Close the door.
When you want to open a rear door when the security lock is on, do the following: 1. Unlock the door using the remote keyless entry transmitter, if the vehicle has one, the power door lock switch, or by lifting the rear door manual lock.
2. Open the door from the outside.
To cancel the rear door security lock, do the following: 1. Unlock the door and open it from the outside.
2. Insert the key into the security lock slot and turn it so the slot is in the vertical position.
Chevrolet Cobalt Service & Repair Manual. Rack & Pinion Assembly, Replace
1.
Ensure front wheels are in straight
ahead position, then secure steering wheel to prevent rotation.
2.
Raise and support vehicle, then remove
wheel and tire assemblies.
3.
Remove steering gear to int ...