Chevrolet Cobalt Service & Repair Manual: Power Brake Units

Parking Brake Cable, Replace

Drum Removal When releasing tension from parking brake cables, use only hand tools. 1. Remove front floor console. 2. Ensure ...

Adjustments

Brake Pedal 1. With ignition OFF and brakes cool, apply brakes three or four times, or until brake pedal becomes firm, in order to deplete brake booster power ...

See also:

Chevrolet Cobalt Owners Manual. Taillamps, Turn Signal, Stoplamps and Back-up Lamps (Sedan)
To replace one of these bulbs: 1. Open the trunk. 2. Remove the trunk trim and pull back fastener. 3. Remove the additional fastener. 4. Remove the outer two screws from the taillamp assembly. 5. Lift up on the tab and pull the wiring harness straight out. 6. Remove the taillamp assembly fro ...