Chevrolet Cobalt Service & Repair Manual: Engine Mount, Replace
Removal
| 1. |
Remove air cleaner assembly. |
| 2. |
Support engine with suitable wooden
block and suitable floor jack positioned below oil pan. |
| 3. |
Remove engine mount mounting nuts. |
| 4. |
Remove engine mount to bracket bolts. |
| 6. |
Reverse procedure to install. |
|
Refer to Fig. 1
when performing the following procedure.
1.
Remove the air cleaner assembly.
2.
Support the engine with a hydr ...
A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern.
Caution: The fuel system is ...
See also:
Chevrolet Cobalt Service & Repair Manual. Wheel, Replace
Removal
Caution: Never use heat to
loosen a tight wheel. This can shorten the life of wheel and damage wheel
bearings.
Wear approved safety glasses when
performing the following service procedures.
Do not use power grinders to clean
any of the brake ...
Engine Mount Bracket R&R
Engine No Start