Chevrolet Cobalt Service & Repair Manual: Wheel Bearing, Replace

Chevrolet Cobalt Service & Repair Manual / Steering & Suspension / Wheel Bearing, Replace

Front

1. Raise and support vehicle using suitable lift.
2. Remove tire and wheel assemblies.
3. Remove drive axle nut, Fig. 1.
4. Remove brake caliper and rotor assembly.
5. Remove hub and bearing assembly, Figs. 2 and 3.
6. Reverse procedure to install.

Fig. 1 Drive axle nut removal

Fig. 2 Hub & bearing assembly removal

Fig. 3 Hub & bearing assembly removal. Cobalt & G5

    Vibration, Diagnosis
    The designs and engineering requirements of vehicles have undergone drastic changes over the last several years. Vehicles are stiffer and provide more isolation from road input than the ...

    Wheel Hub & Bearing, Replace
    Rear Disc Brakes 1. Raise and support vehicle, then the tire and wheel assembly. 2. Without disconnecting the hydraulic brake fle ...

    See also:

    Chevrolet Cobalt Owners Manual. Filling a Portable Fuel Container
    WARNING: Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor. You can be badly burned and the vehicle damaged if this occurs. To help avoid injury to you and others: - Dispense fuel only into approved contai ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.2686