Chevrolet Cobalt Service & Repair Manual: Strut Assembly, Replace
Front
| 1. |
Remove strut assembly upper mounting
nuts. |
| 2. |
Raise and support vehicle, then remove
tire and wheel assembly. |
| 3. |
Remove stabilizer shaft link to strut
assembly retaining nut, then separate shaft link from strut. |
| 4. |
Remove lower strut to steering knuckle
attaching nuts and bolts. |
| 5. |
Remove strut from vehicle. |
| 6. |
Reverse procedure to install, noting
the following: |
| |
a. |
Torque wheel lug nuts to 100
ft. lbs. |
| |
b. |
Torque stabilizer link to strut
to 48 ft. lbs. |
| |
c. |
Torque strut to body nut to
15 ft. lbs. |
| |
d. |
Torque strut to steering knuckle
to 89 ft. lbs. |
| |
e. |
Torque strut shaft nut to 52
ft. lbs. |
|
1.
Raise and support vehicle using suitable
lift.
2.
Remove tire and wheel assemblies.
3.
Separate outer tie ...
Front
Note depth and orientation of
old bushing before removal.
1.
Raise and support vehicle.
2.
Remove lower control arm.
...
See also:
Chevrolet Cobalt Owners Manual. Engine Oil Life System
The engine oil life system calculates engine oil life
based on vehicle use and displays a DIC message
when it is necessary to change the engine oil and filter.
The oil life system should be reset to 100% only
following an oil change.
Resetting the Oil Life System
1. Turn the ignition to ON/RUN ...
Steering Knuckle, Replace
Suspension Control Arm Bushings R&R