Chevrolet Cobalt Service & Repair Manual: Engine Oil Filter Adapter R&R

Refer to Fig. 1 when performing the following procedure.
1. Place a collecting pan underneath the oil filter.
2. Use tool No. EN-44887 to remove the oil filter cap (1) and seal, Fig. 1.
3. Remove and properly dispose of the oil filter insert (2), Fig. 1.
4. Raise the vehicle.
5. Place a collecting pan underneath the oil drain plug.
6. Remove the oil drain plug (1) and seal (2), Fig. 1.
7. Reverse procedure to install, noting the following:
  a. Torque oil drain plug to 18 ft. lbs.
  b. Torque oil filter cap to 18 ft. lbs.

Fig. 1 Oil filter adapter replacement

    Engine No Start
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. Caution: The fuel system is ...

    Engine Oil Pan Gasket R&R
    1. Install the engine support fixture. 2. Remove the engine mount. 3. Raise the engine enough to allow clearance ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Tie Rod, Replace
    Front Outer 1. Raise and support vehicle using suitable lift. 2. Remove tire and wheel assemblies. 3. Remove nut from outer tie rod ball stud, loosen jam nut. 4. Remove ou ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual

    Copyright © 2023 - Chevrolet Auto Manuals - 0.0034