Chevrolet Cobalt Service & Repair Manual: Rear Bumper Impact Bar
Removal
| 1. |
Remove rear bumper fascia as outlined
in Rear Bumper Fascia. |
| 2. |
Remove rear bumper impact bar bolts
(1), Fig. 1. |
| 3. |
Remove rear impact bar (2). |
|
Installation
| 1. |
Carefully position rear impact bar
(2) to vehicle and install bolts (1), Fig. 1. |
| 2. |
Torque bolts to 18 ft. lbs. |
| 3. |
Install rear bumper fascia as outlined
in Rear Bumper Fascia. |
|
Fig. 1 Rear bumper impact bar
Removal
1.
Remove rear bumper fascia as outlined
in Rear Bumper Fascia.
2.
Remove rear bumper fascia side bracket
bolts (1), Fig. ...
Removal
1.
Open rear compartment lid (2).
2.
Remove rear spoiler, if equipped.
3.
Remove rear lock cylinder.
...
See also:
Chevrolet Cobalt Service & Repair Manual. Operation
The desired yaw rate is calculated
from the position of the steering wheel, the speed of the vehicle and the
lateral, or sideways acceleration of the vehicle. The difference between
the desired yaw rate and the actual yaw rate is the yaw rate error, which
is a measurement of o ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Rear Bumper Fascia Bracket
Rear Compartment Lid